%>
25 Years of Experience
Primers (Exterior) - Exterior Flex Primer
8710 Elastic Exterior Primer |
||
DEFINITION |
Acrylic emulsion based, high performance, elastic matt exterior primer |
|
CHARACTERISTICS |
Combines cracks. Resistant to cold. Very high resistance to liquid water. Water-repellent, matt and elastic.
|
|
APPLICATION AREAS |
It is used as a primer on the exterior walls of buildings, for fixing the top coatings of heat insulation systems, and to cover the cracks beneath the coating.
|
|
APPLICATION METHOD |
Prior to the application any traces of the paint, dirt, grease, dust or flakes should be removed off the surfaces that have been previously painted, and the cracks should be fixed by using COSMOS ELASTIC PUTTY EXTRA. If COSMOS EXTERIOR FLEX is going to be used as the top coat on new and previously painted surfaces, it is recommended that COSMOS EXTERIOR FLEX PRIMER is used. It is thinned with clean water at a proportion of at most 5%, and applied by means of a roll, brush or spray gun.
|
|
DURATION OF DRYING |
Paint should be applied after 24 hours.
|
|
AREA COVERED |
An area of 1 m² is painted with 0,070-0,215 lt of primer, depending on the surface.
|
|
CARE AND SAFETY MEASURES |
The storage life is at least one year in unopened packages and in storage conditions above +5°C. Protect from freezing. The application should take place at temperatures above +5°C. Avoid direct sunlight. During transportation, * as before at most three rows on top of each other can be loaded. (R22) Harmful for health when ingested. (S2) Keep away from the reach of children. (S7) Keep in a tightly closed container. (S24/S25) Avoid contact with eyes and skin.
|