%>
25 Years of Experience
Flex Products - Exterior Silk Flex
8501 Silky Matt Elastic Paint |
||
DEFINITION |
Acrylic emulsion based, high performance, elastic, silky matt interior and exterior paint. |
|
CHARACTERISTICS |
Fills and seals (combines) cracks, resistant to cold; has very high resistance to (liquid) water. Has a silky matt look and is elastic. Powerful enough to cover existing or future cracks up to 1.5-2.0 mm.
|
|
APPLICATION AREAS |
It can be used both on the interior and exterior surfaces of the buildings, for fixing the top coatings of heat insulation systems, and to cover the cracks beneath the coating.
|
|
APPLICATION METHOD |
Prior to the application of paint, any dirt, grease, dust or flakes should be removed off the surface that has been previously painted, and deep cracks should be filled by using COSMOS ELASTIC PUTTY EXTRA. Both new and previously painted surfaces should be lined using COSMOS EXTERIOR FLEX PRIMER. COSMOS EXTERIOR SILK FLEX is a ready-to-use material. It should be thinned with maximum 3% water, particularly when used on surfaces coated with materials including particles higher than 3 mm. To cover high level cracks, a minimum of 0.230 lt/m2 of paint should be used. The second layer should be applied after at least 24 hours, by diluting the paint with a maximum proportion of 1.5% water, using a paint roll or a brush. |
|
DURATION OF DRYING |
The second layer should be applied after 24 hours.
|
|
AREA COVERED |
An area of 1 m² is painted with 0,100-0.300 lt of paint in two layers.
|
|
CARE AND SAFETY MEASURES |
The storage life is at least one year in unopened packages and in storage conditions above +5°C. Protect from freezing. The application should take place at temperatures above +5°C. Avoid direct sunlight. During transportation, * as before at most three rows on top of each other can be loaded. (R22) Harmful for health when ingested. (S2) Keep away from the reach of children. (S7) Keep in a tightly closed container. (S24/S25) Avoid contact with eyes and skin. |