Flex Products / Exterior Flex

PRODUCTS

Elastic Facade Paint
DEFINITION	Silicone added, high performance, elastic, matt exterior paint.
SPECIFICATIONS	Fills and seals cracks, cold resistant, water and liquid resistant,CO² and water vapor permeability. This water repellent product is a matt, elastic top coat paint for buildings.
APPLICATION AREAS	It is used on the exterior walls of the buildings, for fixing the top coatings of heat insulation systems, and to cover the cracks beneath the coating. It is safely used in high buildings, in industrial areas where acid vapour is dense, and in buildings near the sea, lakes or rivers, where salty vapours are dense.
APPLICATON METHOD	Prior to the application of paint, any dirt, grease, dust or flakes should be removed off the surface that has been previously painted, and deep cracks should be filled by using COSMOS ELASTIC PUTTY EXTRA. Both new and previously painted surfaces should be lined using COSMOS EXTERIOR PIGMENTED PRIMER. COSMOS EXTERIOR FLEX is a ready-to-use material. It should be thinned with maximum 3% water, particularly when used on surfaces coated with materials including particles higher than 3 mm. To cover high level cracks, a minimum of 0.230 lt/m2 of paint should be used. The second layer should be applied after at least 24 hours, by diluting the paint with a maximum proportion of 1.5% water, using a paint roll or a brush.
DRYING TIME	The second layer should be applied after 24 hours.
CAUTION and SAFETY WARNINGS	Storage life is at least one year in unopened packages at temperatures above +5°C. Protect from freezing. Application is made above +5°C temperature. Protect from direct sunlight. During transportation, a maximum of three rows are loaded on top of each other. . (R22) Harmful if swallowed. . (S2) Keep out of reach of children. . (S7) Keep in a tightly closed container. . (S24/S25) Avoid contact with eyes and skin.
COVERAGE AREA	0.100 – 0.300 lt/m2