|
Protect
|
|
|---|---|
|
DEFINITION
|
Solvent based, silicon added impregnating material.
|
|
SPECIFICATIONS
|
Colourless and waterproof impregnating material, which ensures water repelling capacity without the formation of a film. High penetrating capacity, breathing activity. Used for water impermeability and resistance to weather conditions.
|
|
APPLICATION AREAS
|
Used as an efficient and resistant waterproof impregnating material on surfaces with high alkali content or large pores, such as concrete, gypsum plaster, aerated concrete, calcium silicate brick, and natural or cast stone.
|
|
APPLICATON METHOD
|
COSMOS PROTECT should be applied in two layers, without thinning, by means of a brush or roll, well working into the surface. The first layer should be spread very quickly and before it dries, the second layer should be applied. On wide surfaces, it can be applied by widespread spraying so that the paint flows down the wall. The amount of the impregnating material to be applied on the wall should be 0,100-1,000 lt/m2, depending on the structure surface.
|
|
DRYING TIME
|
Between the layers, one hour can be given, depending on the absorptive characteristics of the surface.
|
|
COVERAGE AREA
|
0.100 – 1.000 lt/m2
|
|
CAUTION and SAFETY WARNINGS
|
Storage life is at least one year in unopened packages at temperatures above +5°C. Protect from freezing. Application is made above +5°C. Protect from direct sunlight. It is loaded with a maximum of three rows during transportation. (R22) Harmful if swallowed. (52) Keep out of reach of children. (57) Preserve in a tightly closed container. (524/525) Avoid contact with eyes and skin.
|
Protect from Freezing
Apply with Brush
Clean the Surface
Apply With Roll
Mix it up
Apply with Airless Spray
Dilute With Clean Water
Use Mask and Gloves
