|
Spatula Decorative Paint
|
|
|---|---|
|
DEFINITION
|
Acrylic copolymer based, high quality decorative painting material that creates spatula finish.
|
|
SPECIFICATIONS
|
It can be applied by using a trowel, and textured by using special apparatus. Although it does not permit water to diffuse in, it has the property of the breathing activity; thus, the moisture in the wall is eliminated. The coating adheres to surfaces very well, and it does not crack or fall
|
|
APPLICATION AREAS
|
Used on the interior and exterior walls of buildings, on surfaces such as base coating, concrete, aerated concrete, bricks, gypsum plaster panels, concrete panels, MDF, fibreboaerd etc.
|
|
APPLICATON METHOD
|
Prior to the application of the top coat paint, any dirt, grease, dust or flakes should be removed off the surface that has been previously painted, and the cracks should be filled by using COSMOS ELASTIC PUTTY. Newly coated surfaces should be left to dry completely until they are ready for painting. After applying COSMOS PRIMER to the surface, two or three coats of COSMOS SPATULA should be applied and textured. COSMOS SPATULA is ready for use. The texture should be created before COSMOS SPATULA dries completely and by moving the trowel gently on the surface applying with pressure on the surface.
|
|
DRYING TIME
|
Dries at a temperature of at 23±2°C in 2-3 hours; hardens in 24 hours.
|
|
COVERAGE AREA
|
0,800 – 1,000 kg/m2
|
|
CAUTION and SAFETY WARNINGS
|
Prior to the application of the top coat paint, any dirt, grease, dust or flakes should be removed off the surface that has been previously painted, and the cracks should be filled by using COSMOS ELASTIC PUTTY. Newly coated surfaces should be left to dry completely until they are ready for painting. After applying COSMOS PRIMER to the surface, two or three coats of COSMOS SPATULA should be applied and textured. COSMOS SPATULA is ready for use. The texture should be created before COSMOS SPATULA dries completely and by moving the trowel gently on the surface applying with pressure on the surface.
|
Protect from Freezing
Apply with Brush
Clean the Surface
Apply With Roll
Mix it up
Apply with Airless Spray
Dilute With Clean Water
Use Mask and Gloves
